长齿条加工专用车床设计(含CAD图,SolidWorks,IGS三维图)
长齿条加工专用车床设计(含CAD图,SolidWorks,IGS三维图)(论文说明书10000字,CAD图纸8张,SolidWorks三维图,IGS通用三维格式)
摘 要
随着现代化工业技术的快速发展，特别是随着它在自动化领域内的快速发展，专用机床的研究已经成为当今机器制造界的一个重要方向，在现代工业运用中，大多数机器的设计和制造都是用机床大批量完成的。现代大型工业技术的飞速发展，降低了专用机床的实现成本，软件支持机制也使得实现变得更为简单，因此，研究专用机床的设计具有十分重要的理论意义和现实意义。
本次设计的题目是长齿条加工专用车床的设计，包括传动装置、进给机构、车削齿条夹具、车床床体的各个零部件的设计，并通过SolidWorks软件对长齿条加工专用车床进行三维建模，并设计出该专用车床的具体结构。通过本次的创新设计，对后续的专用车床的研发和设计将会产生深远的影响和具有现实的意义。
关键词:专用机床 制造 传动装置 设计
Design of lathe machining long rack
Abstract
This article is mainly of the pneumatic manipulator the overall design, and pneumatic design. This mechanism of manipulator includes cylinders and claws and connectors parts, it can move according to the due track on the movement of grabbing, carrying and unloading. The pneumatic part of the design is primarily to choose the right valves and design a reasonable pneumatic control loop, by controlling and regulating pressure, flow and direction of the compressed air to make it get the necessary strength, speed and changed the direction of movement in the prescribed procedure work.Small twisted paper broken machine for ordinary home, not only can be used for minced meat, can also be used with crushed peanuts, crushed ice, spices and other food, small power requirements, powered by the motor drive, [版权所有：http://DOC163.com]
This paper is reasonable structure design, can meet the family kitchen generally meat food consisting mainly of minced required.aslo can according to a fixed procedure to moving objects or control tools. It can replace the heavy labor in order to achieve the production mechanization and automation, and can work in dangerous working environments to protect the personal safety, Therefore widely used in machine building, metallurgy, electronics, light industry and atomic energy sectors.
Keywords:Point-to-point comparison method;interpolation simulation software;
[来源：http://www.doc163.com]
目 录
第1章 绪 论 1
1.1 课题来源及研究目的和意义 1
1.2 本课题的国内外概况 1
1.3 长齿条加工专用车床的组成 5
第2章 机械结构的设计 10
2.1 圆柱齿轮减速器的设计计算 10
2.2 电机的选型计算 10
2.3 V带传动的设计计算 10
2.4 滚珠丝杠的设计 5
2.5 滚珠丝杠副丝杠副传动法面截形，循环方式等的确定 5
2.6 滚珠丝杠的预紧 5
第3章 车床平移装置的设计计算…………………………………………...15
[资料来源：http://Doc163.com]
3.1传动齿轮的选择计算与校核................................................................................20
3.1.1齿轮的选择.....................................................................................................21
3.1.2按齿面接触强度设计.....................................................................................22
3.1.3齿轮的校核.....................................................................................................23
3.2 齿条的设计...........................................................................................................23
第4章 专用车床进给系统各部件的选取及校核………………………..24
4.1 联轴器的选取…………………………………………………………………...25
4.2滚珠丝杠选取与校核……………………………………………………………26
[资料来源：Doc163.com]
4.3滚动轴承的选取与计算……………………………………………………........24
结 论 35
参 考 文 献 36
致 谢 37
[资料来源：https://www.doc163.com]