脂肪酸甲酯环氧基化研究

脂肪酸甲酯环氧基化研究(任务书,开题报告,论文10000字)
摘要
用脂肪酸甲酯和环氧丙烷为原料反应得到的脂肪酸甲酯丙氧基化物是一种性能优良的醚-酯型非离子表面活性剂,由于本身具备优良的耐硬水性,对皮肤刺激小,易生物降解,除污效果好,低泡沫的特点而备受关注,但是由于脂肪酸甲酯结构末端不具备活泼氢,传统的催化剂无法直接使其与环氧丙烷反应得到丙氧基化物,所以本文通过自制新型铜镁铝复合金属氧化物作为脂肪酸甲酯丙氧基化反应的催化剂,探索脂肪酸甲酯一步法丙氧基化反应的可行性,并考察不同反应时间,温度和原料比例对丙氧基化反应的影响,实验表明,原料中脂肪酸甲酯与环氧丙烷的比例为1:1.5,反应温度为150℃,反应时间为7h时,产物的平均分子量最大,PO加合数也最大。
关键词:脂肪酸甲酯丙氧基化复合金属氧化催化剂
Fatty acid methyl ester epoxidation research
Abstract
Propyl methyl oleate oxygen radicals is an excellent oil methyl ether - ester type non-ionic surfactant,Because of hard water resistance, small stimulation to the skin, easy biodegradation, the decontamination effect is good, the characteristics of low foam has been more and more attention.However,due to the fatty acid methyl ester structure end do not have active hydrogen,so that the traditional catalyst can not directly make its reaction with propylene oxide compound c oxygen radicals.In this paper, through the self-made copper magnesium aluminum composite metal oxide used as catalyst for the reaction of fatty acid methyl ester c oxygen radicals.And different reaction time, reaction temperature and raw material ratio of c oxygen radicals.The results showed that the raw material of fatty acid methyl ester with epoxy propane proportion of 1:1. 5, the reaction temperature is 150 ℃, the reaction time of 7 h, average molecular weight of the product is the largest.
[资料来源:www.doc163.com]
Key Words:Fatty Acid Methyl Ester; Coxo reaction; Mixed metal oxides; catalysts
[来源:http://www.doc163.com]


目录
摘要 I
ABSTRACT II
第一章文献综述 1
1.1 前言 1
1.2 FMEE的生产工艺 3
1.2.1传统工艺 3
1.2.2 新合成工艺 3
1.2.3 催化剂的研究 4
1.3 脂肪酸甲酯研究工程中所使用的不同催化体系 4
1.3.1 环氧化催化剂MTC-09 4
1.3.2 固定化脂肪酶Novozym435催化脂肪酸甲酯环氧化 5
1.3.3 强碱性催化剂 5 [资料来源:http://www.doc163.com]
1.3.4 酸性催化剂 5
1.2.4 FMEE的反应机理 7
1.4 工业生产中乙氧基化的反应装置 7
1.4.1 间歇釜式反应装置 7
1.4.2 Press喷雾式装置 8
1.4.3 Buss回路装置 8
1.4.4 管式反应装置 8
1.5 本课题的研究内容 9
1.5.1 研究的目的与意义 9
1.5.2 研究的主要内容 9
1.5.3 实验方案 10
第二章实验部分 11
2.1 实验材料 11
2.1.1 实验药品 11
2.1.2 实验仪器 12
2.2 合成部分 12
2.2.1 催化剂的制备 12
2.2.2 脂肪酸甲酯的制备 12
2.2.3 脂肪酸甲酯的丙氧基化反应 13
2.3 分析方法 13
2.3.1 皂化值的测定 13
2.3.2 平均分子量的计算 14 [来源:http://Doc163.com]
第三章结果与讨论 15
3.1 催化剂用量对丙氧基化反应的影响 15
3.2 温度对丙氧基化反应的影响 17
3.3 不同时间对反应的影响 18
3.4 脂肪酸甲酯与环氧丙烷的反应比例 19
第四章总结与展望 22
4.1 总结 22
4.2 展望 22
参考文献 23
致谢 27
[资料来源:https://www.doc163.com]
