水-油混合溶剂热合成CuSbS2

水-油混合溶剂热合成CuSbS2(含任务书,开题报告,外文翻译,毕业论文9800字,答辩PPT)
摘要
金属三元硫族化合物具有特殊的物理化学性质，在半导体材料，催化剂载体，固体化学，电磁及光学特性等高科技领域具有不可替代的重要性。它们的合成研究已成为目前无机合成化学的一个十分活跃的研究领域。本实验采用水-油混合溶剂热法，制备CuSbS2半导体材料，探讨了不同前驱对制备CuSbS2半导体材料的影响；探讨了以二乙基二硫代氨基甲酸钠制备前驱下，不同溶剂、不同水油比、不同温度因素对CuSbS2半导体材料的影响，采用X射线衍射（XRD）和扫描电镜（SEM）对CuSbS2半导体材料进行了表征。试图得出采用水-油混合溶剂热法制备CuSbS2半导体材料的最佳反应条件。

关键词：铜锑硫；半导体材料；水-油混合溶剂热；溶剂热。

Synthesis of CuSbS2 by the oil – water mixing solvothermal reaction
Abstract
Three element metal chalcogenide has special physical and chemical properties on semiconductor materials, catalyst carrier, solid chemistry, electromagnetic  and optical properties and it has irreplaceable importance in these high-tech fields. Their synthesis has become a very active research field of  inorganic synthetic chemistry now . This experiment adopts  the oil – water mixing solvothermal reaction as the preparation  of cusbs2 , discusses the influence of  different  precursor on cusbs2 preparation; Discussed within sodium diethyl dithiocarbamate preparation of precursor, the influence of different solvents, different water oil ratio and different temperature factors on cusbs2, using X-ray diffraction (XRD) and  scanning electron microscopy (SEM) to  cusbs2 for  being characterized. Results showed that   the optimum of oil - water mixed solvent thermal process for synthesis of cusbs2: apply reagent DDTC as the preparation of the precursor , liquid paraffin as organic solvent, water and paraffin ratio is 1:3, the reaction under 200 ℃ for 12 hours. Try reach a conclusion about the optimum condition of Synthesis of CuSbS2 by theoil-watermixing solvothermal reaction.

[资料来源：https://www.doc163.com]

Key words: copper antimony sulfur; semiconductor materials; the oil – water mixing solvothermal; Solvent heat.
 

[资料来源：http://doc163.com]

目录
摘要    I
Abstract    II
1.引言    1
1.1多元金属硫化物概述    1
1.2三元金属硫化物概况    1
1.3 CuSbS2简述    2
1.4 XRD衍射技术    2
1.5 溶剂热法    3
2.实验部分    4
2.1水-油混合溶剂热合成CuSbS2反应原理    4
2.2试剂及仪器    5
2.3实验过程    6
2.3.1不同前驱合成CuSbS2    6
2.3.1.1乙基黄原酸钾制备前驱合成CuSbS2    6
2.3.1.2二乙基二硫代氨基甲酸钠制备前驱合成CuSbS2    6
2.3.1.3乙酰丙酮制备前驱合成CuSbS2    7
2.3.1.4各前驱不同反应条件下合成CuSbS2    7

2.3.2 二乙基二硫代氨基甲酸钠制备前驱，不同溶剂、温度、水油比合成CuSbS2    8
2.3.2.1以二乙基二硫代氨基甲酸钠为试剂制备前驱    8
2.3.2.2不同溶剂下制备CuSbS2    8
2.3.2.3不同水、油配比下制备CuSbS2    9
2.3.2.4不同温度下制备CuSbS2    9
3.结果与讨论    10
3.1产物的X射线衍射分析（XRD）物相分析    10
3.2产物的扫描电镜（SEM）检测及图像分析    12
3.2.1前驱对产物形貌的影响    12
3.2.2溶剂对产物形貌的影响    14
3.2.3水与溶剂配比对产物形貌的影响    15
3.2.4反应温度对产物形貌的影响    16
4.结论    17
参考文献    18
致谢    21
 

[资料来源：http://www.doc163.com]