山西晋煤集团北石店10000吨污水处理设计(含CAD图)

山西晋煤集团北石店10000吨污水处理设计(含CAD图)(任务书,开题报告,外文翻译,论文计算书10200字,CAD图7张)
摘要:
本设计是以相关的资料为依据,设计一座城市污水处理厂,其日处理量为1万立方米。主要处理来自陕西省晋煤北石店的生活污水,要求处理后出水水质达到《污水综合排放标准(GB8978-96)》中的一级A标准。根据资料污水BOD/COD=0.7,可生化性较好,重金属及其他难以生物降解的有毒有害污染物一般不超标,污水中主要污染物指标BOD、COD值为典型城市污水值,SS超标,磷含量较高,作为处理过程中的营养物质,不需要单独处理,故本设计采用了氧化沟工艺。此工艺污染物去除效率高,运行稳定。能较好的耐受冲击负荷。污泥沉降性能好。日处理量从200t到650000t不等;处理对象可以是生活污水,也可以是有机工业废水;BOD去除率达95%-99%,脱氮效果达90%以上
关键词:城市污水、卡式氧化沟、脱氮
Abstract:
This design is based on the relevant information, design a city sewage treatment plant, the daily amount of 10000 cubic meters. The main treatment of the sewage from Shanxi Province north of Shanxi Province, Shaanxi Province, the sewage treatment is required to meet the sewage effluent standards (GB8978-96), the first A standard. According to the data of sewage BOD/COD=0.7, biochemical better, heavy metals and other hard biodegradation of toxic and harmful pollutants generally does not exceed the standard, sewage main pollutant indexes BOD, COD value value is a typical urban sewage, excessive SS, phosphorus content was higher, as the processing of nutrients, do not need to separate processing, so the design the oxidation ditch process. This process pollutant removal efficiency, stable operation. Can well withstand the impact load. Good sludge deposition performance. The amount of daily treatment ranged from 650000t to 200t, and the treated object could be domestic sewage, or organic waste water, the removal rate of 95%-99% reached BOD, and the denitrification effect reached 90%.
[资料来源:http://www.doc163.com]
格栅
1. 设计说明
栅条的断面主要根据过栅流速确定,过栅流速一般为0.6~1.0m/s,槽内流速0.5m/s左右。如果流速过大,不仅过栅水头损失增加,还可能将已截留在栅上的栅渣冲过格栅,如果流速过小,栅槽内将发生沉淀。此外,在选择格栅断面尺寸时,应注意设计过流能力只为格栅生产厂商提供的最大过流能力的80%,以留有余地。格栅栅条间隙拟定为20.00mm。
2.设计参数
栅前流速v1=0.7m/s 过栅流速v2=0.9m/s
栅条宽度S=0.01m 格栅间隙b=20mm
栅前部分长度0.5m 格栅倾角α=75°
栅前水深h=0.4m 单位栅渣量ω1=0.07m3栅渣/103m3污水
3.设计计算
确定进水渠宽
该水厂的最大设计污水流量Q=0.116m3/s,为了便于格栅的管理与维修,在进水渠中设置两道完全相同的格栅,在两个平行放置的格栅前用导流墙把进水均匀分配到两个格栅。则每个格栅前的流量为
Q=0.116m3/s
[来源:http://www.doc163.com]






目录
污水处理工程
收集资料
基本资料…………………………………………………………………………………3
设计依据…………………………………………………………………………………5
各构筑物的计算………………………………………………………………………5
[来源:http://www.doc163.com]
流量………………………………………………………………………………………5
格栅………………………………………………………………………………………5
调节池和提升泵房………………………………………………………………………7
沉砂池……………………………………………………………………………………9
[来源:http://www.doc163.com]
氧化沟……………………………………………………………………………………11
二沉池……………………………………………………………………………………18
加药间……………………………………………………………………………………19
混合设施…………………………………………………………………………………20
沉淀池……………………………………………………………………………………21
普通快滤池………………………………………………………………………………21
消毒………………………………………………………………………………………25
消毒接触池………………………………………………………………………………25 [资料来源:www.doc163.com]
清水池……………………………………………………………………………………28
污泥处理构筑物
污泥浓缩池………………………………………………………………………………30
贮泥池……………………………………………………………………………………33
污泥脱水…………………………………………………………………………………34 [资料来源:https://www.doc163.com]
各构筑物的高程布置
高程计算…………………………………………………………………………………34
附录
参考文献…………………………………………………………………………………37
设计总结…………………………………………………………………………………38
致谢………………………………………………………………………………………39
[版权所有:http://DOC163.com]